Noyafa NF-8508 multifunkcijski optički metar

Noyafa NF-8508 multifunkcijski optički metar OPM & VFL za 6 talasnih dužina -70 do +10dBm, tragač kablova do 300m, detekcija – svičeva 10,100 ili 1000Mb/s, PoE standarda i napona, rasporeda pinova, dužine kabla do 200m

Dostupno kao narudžbina na zahtev

Uporedi

Dodaj na listu želja

Isporuka besplatna za porudžbine preko 10.000 din

Isporuku vršimo putem kurirski službi i cena isporuke za porudžbine ispod 10.000 din se naplaćuje po cenovniku kurirske službe.

Opis

Noyafa NF-8508

Multi-function Cable Tester

Buy one device, you can test LAN networks, trace network cables, measure cable length, locate ports, check PoE, test fiber optics, test QC heads, etc.

NF-8508 Optical Fiber Meter Tracer Product Introduction

OPM – Optical Power Meter

Measure wavelengths of SM MM fiber optics such as 1310, 1550, 1625 with a test range of-70dBm to +10dBm,

NF-8508 Visucal Fault Locator for Fiber Optics

VFL – Visual Fault Locator

Transmit a 10mw red light source (1HZ, 2HZ, Hold) in the whole fiber optic cable. Quickly tell if the cable works fine and locate the break.

Cable Tracing

Quickly and accurately locate a target cable in a clutter of cables using the high-sensitivity, anti-jamming probe and tone-generator of the Receiver.

PoE Check

Run a complete checking on PoE devices to identity standards, power supply, voltage, polarity, and PSE.

Port Flash

Change the frequency of cable blinking on router and server ports to find the correct cable port.

Cable Length

Disconnect the cable from both ends first. Plug it into the NF-8508 and activate the Measure feature. Any cable that’s longer than 2.5m (8.2 feet) and shorter than 200m (656 feet) will be measured accurately.

Continuity Test

Test Lan network cable continuity, identify the exact fault, and give location of the fault point.

QC Test

Understanding the basic status of the cable is based on the correct installation sequence of the cable and the results of the crystal head crimp test.